Équipement et logiciel pour des études géophysiques: conception, fabrication, soutien, fourniture

Inclinometer probe INCLIS DH

Caractéristiques principales:
  • Allows to perform a 3D borehole deviation survey
  • 3 magnetometric and 3 accelerometric sensors
  • Optional set of aluminium rods (when iron casing is present)
Prix : sur demande
+
The product was successfully added to basket

The new inclinometer probe INCLIS DH, designed by SolGeo, allows to perform a 3D borehole deviation survey it is equipped with 3 magnetometric and an 3 accelerometric sensors. In case of iron casing which makes impossible the right working of the magnetometric sensors, the system is provided with a set of aluminium rod that allows to drive the probe inside the BH. INCLIS-DH is connected to the PC trough a USB Junction box which provides the power supply and the data transfer.

Probe characteristic

Dimensions

100 cm x 40 mm diameter

Weight

4 Kg

Operating temperature

- 40 ÷ 125 C (-10 ÷ 125 C with recommended batteries)

Connectors

souriau 200 bar IP69

Shock limit

500 g

Enclosure material

brass

Software

Windows XP, Vista, 7

Digital output

USB 2.0

ply voltage

direct from USB

Internal sensors

Orientation range

360° about all axes (orientation angles); inclination, azimuth, GTF, MTF, Dip Angle

Accelerometer range

24 bits accelerometer; 16 bits magnetometer

Angle resolution

0.02°

Accuracy

± 0.2° inclination / ± 0.5° azimuth

Angle measurement repeatability

0.1°

Digital output rate/logging rate

up to 8 Hz

Output modes

acceleration and magnetic field vectors plus temperature; orientation angles plus temperature

Serial data rate

115200 baud

Datalogging capacity

up to 32.768 data records

Supply current

50 mA typical when connected to host 16 mA typical when logging at 8Hz 500 μA typical when logging at 1/4 Hz 50 μA typical in deep sleep mode

Digital output

RS-422 serial (four-wire full-duplex) standard

Supply voltage

+6.0 VDC min, +10.0 VDC max